-
l'audio
- Ensembles audio
- Radio automobile
- CD, DVD et télévision
- Carkits / Mains Libres
-
Intégré
- AUX / Adaptateurs
- Accessoires
- Modules de sons actifs
- Accessoires d'antenne
- Adaptateurs d'antenne
- Antennes
- Câbles d'extension d'antenne
- Panneaux de montage audio
- Condensateurs
- Accessoires FISCUBE
- FM transmitter
- Antennes GPS
- Adaptateur multimédia IMA
- Kits de câbles
- Câbles
- boîte de haut-parleur
- Audio du moteur
- Adaptateur radio OEM
- Accessoires Pioneer
- Démontage radio
- Câbles à gradient radio
- Émetteurs
- Fusibles
- Porte fusible
- Accessoires iPod
-
Haut-parleurs
- Haut-parleurs de 10 cm
- Haut-parleurs de 12 cm
- Haut-parleurs de 13 cm
- Haut-parleurs de 16 cm
- Haut-parleurs de 17 cm
- Haut-parleurs de 20 cm
- Haut-parleurs de 25 cm
- Haut-parleurs de 30 cm
- Haut-parleurs de 4 x 10 cm
- Haut-parleurs de 4 x 6 cm
- Haut-parleurs de 5 x 7 cm
- Haut-parleurs de 6 x 8 cm
- Haut-parleurs de 6 x 9 cm
- 6 cm speakers
- Haut-parleurs de 7 cm
- Haut-parleurs de 8 cm
- Haut-parleurs spécifiques à la voiture
- ensembles
- Écouteurs
- Kits de haut-parleurs personnalisés
- Tweeters
- Haut-parleur résistant à l'eau
- Subwoofers
- Amplificateurs
-
Divers
- Derrière la voiture
- Apple Watch Bandjes
- Matériel de fixation
- Réparation du Carrosserie
- Les animaux
- Divers
- Nourriture et boissons
-
Des outils
- Bitsets
- Clé à bougie
- Compressor
- Douilles / clés à douille
- Clés à filtre
- Jeux d'outils
- Marteaux
- Clés Inbus / Torx
- Cric
- Brosse
- Treuils
- Feux de circulation
- Couteaux
- Mètres
- Clés
- Support moteur
- Roues de nez
- Burette d'huile
- Pneumatiquement
- Rivets pop
- Clé à cliquet
- Ruban à mesurer
- Ciseaux
- Kits de réparation de filetage
- Tournevis
- Colliers de serrage
- filières rondes
- Articles de soudure
- Demandeurs de tension
- Brosses d'acier
- Cles plates / clés douille
- Aspirateurs
- Pinces
- Ruban
- Clips de test
- Testeurs
- Tie wraps
- Entonnoirs / pichets
- Pinces à ressort
- Pistolet à graisse
- niveau à bulle
- Lampe de travail
- Outils d'atelier
- Produits d'atelier
- Clé de roue
- Scie
- Lampes de poche
- Couvertures
- Les vêtements
- OUTLET SHOP
- Magasin
- Produits de rallye
- Loisirs et vacances
- Red Bull
- La sécurité
- Peinture et vernis
-
Liquides
- 5in1
- Additifs
- Bidons d'essence
- Eau distillée
- Nettoyants pour les mains
- Nettoyants d'injection
- Brocs verseurs / Bacs
- Produits de système de refroidissement
- Liquide de refroidissement
- Liqui Moly
- Moteur de nettoyage
- Additifs d'huile
- Les huiles
- Nettoyant
- Nettoyants / Dégraissants
- Huile de frein / hydr / transmission
- Liquide lave-glace
- Lubrifiants
- Sprays
- Entrée
- Entonnoirs
- Graisses
- Liquides
- Pompes à liquide
- Produits d'atelier
- Unsorted
- Électronique
- Extérieur
-
Intérieur
-
Pilote et cockpit
- Accoudoir
- Miroir intérieur
- Chaises de bureau
- Carbon Interieurdelen
- Cockpit
- Tableau de bord
- Accessoires de ceinture de sécurité
- Rembourrage pour ceinture de sécurité
- Ceinture de sécurité
- Frein de stationnement
- Interieur Lijsten
- Pédales
- Pommeau
- Volant sport
- Sièges
- Cadres de chaise
- Housses de siège
- Adaptateurs de volant
- Couvre volant
- Boutons volant
- Moyeux de volant
- Fond de compteur
- Confort et sécurité
- Les détenteurs
- Sièges auto
- Les organisateurs
- Produits de rallye
- Style et luxe
- Pare-soleil
-
Pilote et cockpit
-
Châssis
- Suspension pneumatique et électronique
- Les freins
- Amortisseurs
-
Combinés filetés
- Combinés filetés AP
- Combinés filetés Bilstein
- Schroefsets Cobra
- Combinés filetés Eibach
- Combinés filetés H&R
- Combinés filetés HD
- Combinés filetés JOM
- Combinés filetés KONI
- Combinés filetés KW
- Schroefsets Ohlins
- Combinés filetés SPAX
- Combinés filetés ST
- Combinés filetés TEIN
- Combinés filetés VanSlam
- Combinés filetés Vogtland
- Élargisseur de voie et adaptateurs
- Kit ressorts et amortisseurs
- Stabilisation et tenue de route
- Ressorts courts
- Pièces de rechange et autres
- Performance
- Vernis
-
L'éclairage
- Divers
- Phares et feux arrière
- LED et néon
-
Lampes
- 880 Lampes
- 881 Lampes
- 893 Lampes
- 9005xs lampes
- 9006xs lampes
- BA15D Base ampoule
- BA15S Base ampoule
- BA9S Base ampoule
- BAT9S Base ampoule
- BAU15S Base ampoule
- BAX10S Base ampoule
- BAX9S Base ampoule
- BAY15D Base ampoule
- BAZ15D Base ampoule
- Lampes à tube
- DUPLO Lampes
- Ampoule caravane
- H1 Lampes
- H10 Lampes
- H11 Lampes
- H11B Lampes
- H13 Lampes
- H15 Lampes
- H16 Lampes
- H2 Lampes
- H3 Lampes
- H3C Lampes
- H4 Lampes
- H7 Lampes
- H8 Lampes
- H9 Lampes
- HB1 Lampes
- HB3 Lampes
- HB4 Lampes
- HB5 Lampes
- HS1 Lampes
- HiR2/9012 Lampes
- Osram
- Autre
- P13W lampen
- P21W Base ampoule
- P27/7W
- P45T Base ampoule
- PR21/5W
- PR21W
- PS19W
- PSX24W Lampes
- PSY Lampes
- PY21W Base ampoule
- PY24
- R2 Lampes
- R702K Lampes
- S25 Base ampoule
- SV8 Base ampoule
- Lampes de scooter
- T10 Base ampoule
- T15 W16W
- T16 Base ampoule
- T20 Base ampoule
- T25 Base ampoule
- T2W Base ampoule
- T4W Base ampoule
- T5 Base ampoule
- W21/5W Base ampoule
- W21W lampen
- Unités d'éclairage
- Xenon
- Jantes
- Hiver et saison
Filtre
Manufacturer Navigation
Manufacturer A-Z
-
(22)
Absaar
-
(1)
AccuAir
-
(3)
AceWell
-
(1)
Active Autowerke
-
(25)
AEZ
-
(6)
aFe Power
-
(73)
AirSuspension Links
-
(246)
Akrapovic
-
(2)
Alti Giri
-
(2)
ANAF
-
(1)
Anygrip
-
(822)
AP
-
(316)
AP Schroefsets
-
(311)
AP Suspension
-
(20)
Arbre Magique
-
(2)
Argo
-
(67)
Armaspeed
-
(12)
Armor All
-
(803)
Armytrix
-
(278)
artFORM
-
(1)
ASD Tuning
-
(237)
Athena
-
(88)
Autoglym
-
(4)
AutoSky
-
(7181)
AutoStyle
-
(29)
Avant-Garde
-
(2194)
Avisa
-
(187)
Bagyard-Airride
-
(2)
Bar's
-
(11)
Bari
-
(4)
Bastuck
-
(1)
Batavia
-
(277)
BBS
-
(15)
BE by Breyton
-
(24)
BE Wheels
-
(7)
Belgom
-
(2)
Belmic
-
(361)
BEYERN
-
(48)
Bigboi
-
(1087)
Bilstein
-
(6)
Bilstein B10
-
(5329)
Bilstein B12
-
(2157)
Bilstein B14
-
(2865)
Bilstein B16
-
(5)
Bilstein B16CS
-
(14)
Bilstein B16DT
-
(4)
Bilstein B16DT2
-
(35)
Bilstein B2
-
(1277)
Bilstein B3
-
(18898)
Bilstein B4
-
(13578)
Bilstein B6
-
(15)
Bilstein B6DM
-
(118)
Bilstein B6DT
-
(9627)
Bilstein B8
-
(26)
Bilstein B8DT
-
(36)
Bilstein EVO
-
(9)
Bilstein EVO R
-
(15)
Bilstein EVO S
-
(7)
Bilstein EVO SE
-
(5)
Bilstein EVO T1
-
(3)
Bilstein EVO T2
-
(511)
Bilstein Overig
-
(3)
Black & Decker
-
(72)
Blanco
-
(21)
Blaupunkt
-
(2)
Bleko
-
(15)
BMW Original Parts
-
(483)
Bonrath
-
(683)
BORBET
-
(70)
Bosch
-
(2453)
Brembo
-
(226)
Breyton
-
(100)
Bridgestone
-
(1710)
Brock
-
(12)
Brunox
-
(168)
Cades
-
(372)
Calibre Wheels
-
(24)
California Scents
-
(185)
Car Bags
-
(1440)
Car Shades
-
(9)
Caractere
-
(1)
CarCept
-
(16)
CarFantasy
-
(4)
Carkids
-
(1223)
Carmani
-
(53)
Carnamics
-
(1683)
Carpoint
-
(112)
Castrol
-
(10)
Celly
-
(10)
CFC
-
(184)
CFC Car Film Components
-
(271)
Charge Speed
-
(54)
Chemical Guys
-
(367)
CIKCAR
-
(1)
Clarion
-
(5188)
ClimAir
-
(168)
Cobra
-
(10)
Commandant
-
(948)
Continental
-
(2)
Control Fire
-
(21702)
COR WHEELS
-
(42)
CRAY
-
(60)
Crunch
-
(1)
Cruz
-
(1)
CSF
-
(2934)
CSR
-
(11)
Cult-Society
-
(975)
M-tech
-
(56)
Mabor
-
(5)
MAC
-
(1)
Maggi
-
(12731)
Magnaflow
-
(240)
MANDRUS
-
(1)
Marternator
-
(32)
Martin Cox
-
(3)
Matador
-
(354)
MAX6
-
(1)
Maxlife
-
(1)
maxton
-
(6932)
Maxton Design
-
(132)
Maxton Design Carbon Division
-
(400)
mbDESIGN
-
(157)
McGard
-
(2)
MEC design
-
(1)
Mechanix Wear
-
(170)
Meguiar's
-
(13)
Menabo
-
(1)
Mentos
-
(17)
MER
-
(6)
MHW Styling
-
(284)
Michelin
-
(1)
MILLE MIGLIA
-
(1630)
Milltek
-
(1)
Mlltek
-
(2)
Mobil
-
(84)
MOMO
-
(207)
Motec
-
(74)
Motip
-
(48)
Motor X
-
(157)
Motordrome
-
(19)
MST Performance
-
(36)
Mtech
-
(1)
P3
-
(1)
P3x
-
(1)
PAM
-
(461)
Pantherbra
-
(1)
PantherBra Carbon
-
(9)
Parksafe
-
(1)
Parrot
-
(14)
Pavo
-
(2)
Peruzzo
-
(102)
Philips
-
(4)
PIAA
-
(11)
Pilot
-
(7)
Pilot Xenon
-
(14)
Pingi
-
(72)
Pioneer
-
(5183)
Pipercross
-
(64)
Pirelli
-
(3)
Plastico
-
(3526)
PowerFlex
-
(3)
PowerRepair
-
(72)
Pressol
-
(1)
Pro-User
-
(4)
Procar
-
(227)
Protecton
-
(34)
Racimex
-
(1)
Racingline
-
(112)
Racoon
-
(156)
RADI8
-
(2569)
Ragazzon
-
(10)
RAID HP
-
(1)
Rain Buster
-
(2)
Rain Vision
-
(17)
Rain-X
-
(624)
RC Design
-
(936)
RC-Design
-
(189)
RDX
-
(1021)
RDX Racedesign
-
(12)
Recaro
-
(29)
Red Bull Racing
-
(938)
REMUS
-
(15)
Repaparts
-
(1)
ResQMe
-
(1)
Restore
-
(32)
Revotec
-
(3083)
RGM
-
(2)
Rial
-
(1726)
Rieger Tuning
-
(41)
RimRingz
-
(199)
Rockford Fosgate
-
(592)
RotiForm
-
(6)
Rustyco
-
(11)
Rustyco roestverdelger
-
(28)
Sabelt
-
(31)
Samco
-
(799)
Samco Sport
-
(7)
Saunders
-
(16)
SCC
-
(7233)
SCC Spoorverbreders
-
(9009)
Schmidt
-
(241)
Schrick
-
(8)
Schroth Racing
-
(356)
Scorpion Exhaust
-
(192)
Semperit
-
(6)
Shampoos
-
(40)
ShineMate
-
(16)
Sicurit
-
(203)
Sicustar
-
(1)
Sicutruck
-
(15)
Sicutune
-
(499)
SiliconHoses
-
(804)
Simoni Racing
-
(4)
Simoniz
-
(527)
Simons
-
(1)
Slick50
-
(9)
Slime
-
(1)
SmartVan
-
(212)
SONAX
-
(385)
Sonniboy
-
(615)
Sparco
-
(286)
SPAX
-
(10)
SPY
-
(200)
SRS-Tec
-
(11)
SSDN Audio
-
(8)
SSDN Mobile
-
(2782)
ST Suspension
-
(16)
STANCE WHEELS
-
(2)
Stanley
-
(4)
Stoplock
-
(2)
STP
-
(11)
Streetwize
-
(87)
STRO Performance
-
(1)
STRO-Performance
-
(27)
STUTTGART
-
(179)
SunClip
-
(1)
Supersport
-
(9102)
Supersprint
-
(71)
SYRON
LSD vleugeldeuren Ford Focus 10/98- Type: DNW,DAX,DA1,DB1,DBY 5-door Bouwjaar: 10/98- Opmerkingen: a/ d/ g/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Focus 12/04- Type: DA3 3-door Bouwjaar: 12/04- Opmerkingen: a/ b/ d/ f/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Focus 12/04- Type: 5-door Bouwjaar: 12/04- Opmerkingen: a/ b/ d/ f/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Mustang 05- Type: Coupe, Convertible Bouwjaar: 05- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Mustang 15- Opmerking: Demontage en/of aanpassingen aan de wielkuiplijsten zijn noodzakelijk. Alleen voor de basis 3 deurs uitvoering. Het verlengen van de kabelboom in de deur is noodzakelijk. Bij het model met airbags in de portieren dienen de ze te worden gecontroleerd na het verlengen van de kabelboom. De gasdrukdempers zijn op basis van het gewicht va n de originele portieren geselecteerd. Bij afwijkende portiergewichten diene n de sterkere of zwakkere gasdrukdempers extra te worden besteld. De meerprijs bedraagt € 72,60 Gasdrukdempers kunnen door temperatuurschommelingen in kracht afnemen of toenemen. Deze afwijkingen vallen niet onder garantie, tenzij kan worden aangetoond dat het om een materiaal of productiefout gaat.
LSD vleugeldeuren Honda Civic 01/06- Type: FK1,2,3 5-door Bouwjaar: 01/06- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 02/01- Type: EP1,2,3,4,EM2,EV1 3-door Bouwjaar: 02/01- Opmerkingen: a/ b/ c/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 03/07- Type: FN1,2,3 3-door Bouwjaar: 03/07- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 10/91-11/95 Type: EG4 3-door Bouwjaar: 10/91-11/95 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 10/95-01/01 Type: EK1,3,4,9 3-door/Hatchback Bouwjaar: 10/95-01/01 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 94/95 Type: EJ1,2 3-door Bouwjaar: 94/95 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic, CRX 07/92-98 Type: EG2,EH6 3-door Bouwjaar: 07/92-98 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic, CRX 89-6/92 Type: EC8,9,ED6,7,9,EE8,9 3-door Bouwjaar: 89-6/92 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Integra 10/97-10/01 Type: DC2 Bouwjaar: 10/97-10/01 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda S 2000 06/99- Type: AP 1 Bouwjaar: 06/99- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Hummer H2 Type: Bouwjaar: Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Hyundai Coupé 03/02- Type: GK Bouwjaar: 03/02- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Lamborghini Gallardo 03- Type: Coupe Bouwjaar: 03- Opmerkingen: a/ b/ d/ j/ p Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mazda MX5 05/90-04/98 Type: NA Bouwjaar: 05/90-04/98 Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mazda MX6 05/98- Type: NB, NBD Bouwjaar: 05/98- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mazda MX7 03/05- Type: NC, NC1E Bouwjaar: 03/05- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mazda RX 8 12/03- Type: SE Coupe Bouwjaar: 12/03- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes CL 03/99- Type: 215 Coupe Bouwjaar: 03/99- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes CL 05/06- Type: 216 Coupe Bouwjaar: 05/06- Opmerkingen: a/ b/ d/ j/ p/ Z Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes CLK 06/02- Type: 209 Coupe, Convertible Bouwjaar: 06/02- Opmerkingen: a/ b/ c/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes CLK 06/97-06/02 Type: 208 Coupe, Convertible Bouwjaar: 06/97-06/02 Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes SL 07/01- Type: 230 Bouwjaar: 07/01- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes SL 3/89-10/01 Type: 129 Bouwjaar: 3/89-10/01 Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes SLK 06/04- Type: 171 Bouwjaar: 06/04- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes SLK 09/96- Type: 170 Bouwjaar: 09/96- Opmerkingen: a/ d/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mini Cooper 06/01- Type: R50, Mini incl. Convertible Bouwjaar: 06/01- Opmerkingen: a/ b/ d/ f/ i/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mitsubishi Colt 06/04- Type: CZ3 3-door Bouwjaar: 06/04- Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mitsubishi Eclipse 12/95- Type: D30 Coupe, Spyder Bouwjaar: 12/95- Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Nissan Z350 10/03- Type: Z33 incl. Convertible Bouwjaar: 10/03- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Astra F 10/91- Type: F-CC, F-Cabrio 3-door, Convertible Bouwjaar: 10/91- Opmerkingen: a/ b/ f/ i/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Astra G 05/98- Type: T98, /V, /C, T98/NB Coupe, Conv., Sedan Bouwjaar: 05/98- Opmerkingen: a/ b/ d/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.