Akrapovic Toyota Gr Yaris – “Evolution” Link Pipe

Akrapovic Toyota Gr Yaris – “Evolution” Link Pipe This exhaust is constructed with high-grade austenitic stainless steel and designed to be installed with the Akrapovic Slip-On Race Line (Titanium) exhaust system. The sound is further enhanced by a tuned resonator in the middle part of the link pipe, calculated to deliver a perfect sound experience, serving up a deep, rich, and sporty sound with no drone or streaming, to create a pure three-cylinder racing sound from the engine. It delivers power and torque increases of 13.5 kW (18.4 hp) at 5,900 rpm and 21.8 Nm at 5,900 rpm when using a combination of the Slip-On Race Line (Titanium) with an Evolution Link Pipe (SS) and tested on the Akrapovic dyno against a GR Yaris with a standard stock exhaust. Designed for racetracks and closed courses only and requiring mandatory remapping of the ECU, the link pipe weighs in at 19,6 % lighter than stock and removes the standard OPF/GPF. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Akrapovic Toyota Gr Yaris – “Slip On” Race Line Titanium Exhaust System

Akrapovic Toyota Gr Yaris – “Slip On” Race Line Titanium Exhaust System  This exhaust is produced using race-proven, high-grade titanium for the entire system and features megaphone-shaped tailpipes. A collector centred between the rear resonators has been cast in the in-house foundry; this collector optimizes and balances the gas flow to produce an acoustically tuned sound with no drone. Three resonators two at the back of the collector and one in the middle pipe further tune the sound experience to create a sporty racing tone, fully enhancing the engines characteristics with a deep and enthusiastic sound, to give the occupants a feeling of exhilaration that is never interrupted by excess noise. The engineers have placed a special emphasis on the acoustics in the middle and high rev range, with a high-frequency tone at higher rpms and more sound at idle and revving. This sound is managed by two megaphone-shaped titanium tailpipes that are welded to the exhaust and specially coated to resist any colour changes at high temperatures. The shape of the tailpipes influences the sound. They are bigger than stock, measuring in at 110 mm, and have a similar profile to the Akrapovic exhaust for the Toyota GR Supra. Developed to decrease back pressure, the system weighs in at 7,8 kg, which is 37 % lighter than stock and yields power gains of 9.5 kW (12.9 hp) at 6,950 rpm and torque increases of 13.0 Nm at 6,950 rpm when tested on the Akrapovic dyno against a Toyota GR Yaris with a standard stock exhaust. This exhaust is designed for use on racetracks and closed courses only. It is necessary to cut the stock exhaust system when installing this product, but no ECU remapping is needed for this configuration. An optional Evolution link pipe is available for customers looking to extend the exhaust tuning possibilities for even better performance of the Akrapovic Slip-On Race Line (Titanium) system. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Akrapovic Toyota Supra (A90) & BMW M340i (G20/G21) M440I (G22, G23) Z4 M50i (G29) – Downpipe met Rac

Akrapovic Toyota Supra (A90) & BMW M340i (G20/G21) M440I (G22, G23) Z4 M50i (G29) With Gpf – Downpipe met Racecat   Downpipe w Cat (SS) was tested and developed together with Evolution Line (Titanium) system. The high-flow downpipe is constructed using high-quality stainless steel and, once fitted to the Evolution Line exhaust, it creates a complete system from the manifold to the tailpipes that will further enhance the performance figures: both the torque and power outputs. It incorporates a sporty catalytic converter. This optional downpipe produces an enhanced sound that delivers a pure racing emotion and fantastic feedback at high revs, without unwanted drone, making it suitable for everyday use. When installing the Akrapovic downpipe, remapping the ECU is mandatory in order to prevent potential check engine light warning signals. Downpipe is optional product to the following evolution systems: Toyota Supra (A90) with OPF/GPF: Slip-On Line (Titanium) + Evolution Link pipe (SS) – S-TY/T/1H + E-TY/SS/2 BMW Z4 M40i (G29) with OPF/GPF: Slip-On Line (Titanium) + Evolution Link pipe (SS) – S-BM/T/9H + E-TY/SS/2 THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE. Fabrikant: AKRAPOVIC SKU: DP-TY/SS/2 Automerk: ToyotaType: SUPRA (A90) with GPF – Bouwjaar: 2019 – –

Akrapovic Toyota Supra (A90) BMW Z4 M40I (G29) met Gpf – “Evolution” Link Pipe

Akrapovic Toyota Supra (A90) BMW Z4 M40I (G29) met Gpf – “Evolution” Link Pipe Evolution Link Pipe Set (Titanium) was tested and developed together with the Slip-On or the Evolution Line (Titanium) system. The Evolution link pipe set upgrades the Slip-On system to the Evolution system. The Evolution link pipe set is constructed from high-quality austenitic stainless steel. It features an arrangement of two central link pipes for the best flow of the exhaust gases from the engine. It is designed to increase power and torque and reduce overall weight, while delivering a deep and sporty sound with no unwanted drone or streaming. When installing the Akrapovic Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential check engine light warning signals. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE. Fabrikant: AKRAPOVIC SKU: E-TY/SS/2 Automerk: Toyota Type: SUPRA (A90) with GPF – Bouwjaar: 2019 – –

Akrapovic Toyota Supra (A90) With Gpf – “Slip On” Titanium Exhaust System

Akrapovic Toyota Supra (A90) With Gpf – “Slip On” Titanium Exhaust System This ECE type-approved system is constructed entirely from high-grade titanium and features an exhaust valve with a housing cast in the in-house foundry. The single muffler arrangement has a unique set of titanium tailpipes, utilising a design not previously seen on an aftermarket exhaust. Fully adapted to the lines of the car, the outer side of the tailpipe has been coated for increased durability, while the inner surface has a bluish-purple natural titanium colour achieved by annealing, plus a stylish and sporty imprint design to give the system a very special and exclusive finish. Through the use of lightweight materials, the system will reduce overall vehicle weight, optimising power and torque through the entire rev range. Different sound modes offer a pleasant experience in comfort mode without any intrusive drone and, when the driving gets more dynamic and enthusiastic, the exhaust produces a vibrant and deep roar from the six-cylinder engine, which the Supra is well known for, and adds an exciting and exhilarating sensation as the revs rise. An optional Akrapovic Sound Kit is available to control the various sound settings, and optional tuning opportunities exist through the addition of the stainless-steel Evolution Link Pipe set. As with the Sound Kit, fitting the Link Pipe will negate the ECE type approval. Fitment and ECE type-approval are valid for engine type B58B30C. ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.For installing the slip-on system, the stock exhaust system has to be cut. Please read the instructions carefully before the start of the installation. Fabrikant: AKRAPOVIC SKU: S-TY/T/1H Automerk: Toyota Type: SUPRA (A90) with GPF – Bouwjaar: 2019 – –

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Alfa GTV Typ 916 system Uitgang rechts/links - 2x76 Typ 10 recht

Alfa GTV Typ 916 system Uitgang rechts/links - 2x76 Typ 10 rechts/links Passend voor: Buisdiameter: Opmerkingen: Merk: FOX Levertijd: 1 tot 14 dagen

Alfa GTV Typ 916 system Uitgang rechts/links - 2x76 Typ 18 recht

Alfa GTV Typ 916 system Uitgang rechts/links - 2x76 Typ 18 rechts/links Passend voor: Buisdiameter: Opmerkingen: Merk: FOX Levertijd: 1 tot 14 dagen

Alfa Romeo 145 1.3ie 1351 cc 66 Kw / 90 cv AR33501 Magnaflow CAT

Alfa Romeo 145 1.3ie 1351 cc 66 Kw / 90 cv AR33501 Magnaflow CAT Bouwjaar: 1/94>12/96 Merk: Alfa Romeo Type: 145 1.3ie 1351 cc 66 Kw / 90 cv AR33501 Bouwjaar: 1/94>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80012 OBD not neaded,Euro I and II,Ref. OE:, 60590735, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.4i 16V 1370 cc 77 Kw / 105 cv AR33503 Magnaflow

Alfa Romeo 145 1.4i 16V 1370 cc 77 Kw / 105 cv AR33503 Magnaflow CAT Bouwjaar: 1/97>8/00 Merk: Alfa Romeo Type: 145 1.4i 16V 1370 cc 77 Kw / 105 cv AR33503 Bouwjaar: 1/97>8/00 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80064 OBD not neaded,Euro I and II,Ref. OE:, 60626893, 60626894, 60630078, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.4ie 1351 cc 66 Kw / 90 cv AR33501 Magnaflow CAT

Alfa Romeo 145 1.4ie 1351 cc 66 Kw / 90 cv AR33501 Magnaflow CAT Bouwjaar: 1/94>12/96 Merk: Alfa Romeo Type: 145 1.4ie 1351 cc 66 Kw / 90 cv AR33501 Bouwjaar: 1/94>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80012 OBD not neaded,Euro I and II,Ref. OE:, 60590735, Levertijd 1 tot 2 weken

ALFA ROMEO 145 1.6 16V Twin Spark ' 97 Manifold for OEM catalytic converter

ALFA ROMEO 145 1.6 16V Twin Spark ' 97 Manifold for OEM catalytic converter Manifold for OEM catalytic converter for Alfa Romeo 145 1.6 16V Twin Spark A good header design is key to unlocking performance gains from naturally aspirated motors. At Supersprint every header is designed, developed and manufactured within our factory here in Mantova, Italy. With performance gains the main objective, we study and design primary and secondary piping configurations with varying diameters and lengths. These are then tested on our in-house MAHA Dynamometer enabling us to recognise the optimum setup. We also ensure the 02 sensor bungs remain in their original position for ideal fitting. Supersprint headers are manufactured using industry leading techniques from the best German 304 and 310S stainless steel with piping thickness variable from 1 to 1.5mm, along with CNC machined, hi-precision laser cut flanges built from 409 and 304 steel for perfect fitment and longevity. Our joints are TIG welded in order to guarantee strength and durability. For temperature critical, delicate applications we also use Inconel for some of our products.  These materials and processes ensure Supersprint headers are extremely high quality, durable products that offer true, tangible performance gains.

ALFA ROMEO 145 1.6 16V Twin Spark 97 –› Supersprint Manifold for

ALFA ROMEO 145 1.6 16V Twin Spark 97 –› Supersprint Manifold for OEM Kat Informatie:Supersprint onderdeel: Manifold for OEM Kat Past op: ALFA ROMEO 145 1.6 16V Twin Spark 97 –› Supersprint nummer: 752701 compatible with the OEM catalytic convertersocket for oxygen sensors OEMSupersprint:- Centre exhaust 752703 - Rear exhaust 752909

Alfa Romeo 145 1.6i 16V 1598 cc 89 Kw / 121 cv AR67601 Magnaflow

Alfa Romeo 145 1.6i 16V 1598 cc 89 Kw / 121 cv AR67601 Magnaflow CAT Bouwjaar: 1/97>8/00 Merk: Alfa Romeo Type: 145 1.6i 16V 1598 cc 89 Kw / 121 cv AR67601 Bouwjaar: 1/97>8/00 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80064 OBD not neaded,Euro I and II,Ref. OE:, 60626893, 60626894, 60630078, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.6ie 1596 cc 76 Kw / 103 cv AR33201 Magnaflow CA

Alfa Romeo 145 1.6ie 1596 cc 76 Kw / 103 cv AR33201 Magnaflow CAT Bouwjaar: 1/94>12/96 Merk: Alfa Romeo Type: 145 1.6ie 1596 cc 76 Kw / 103 cv AR33201 Bouwjaar: 1/94>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80012 OBD not neaded,Euro I and II,Ref. OE:, 60590735, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.7ie 16V 1712 cc 95 Kw / 129 cv AR33401 Magnaflo

Alfa Romeo 145 1.7ie 16V 1712 cc 95 Kw / 129 cv AR33401 Magnaflow CAT Bouwjaar: 1/94>12/96 Merk: Alfa Romeo Type: 145 1.7ie 16V 1712 cc 95 Kw / 129 cv AR33401 Bouwjaar: 1/94>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80012 OBD not neaded,Euro I and II,Ref. OE:, 60590735, Levertijd 1 tot 2 weken

ALFA ROMEO 145 1.8 16V Twin Spark 97 –› Supersprint Manifold for

ALFA ROMEO 145 1.8 16V Twin Spark 97 –› Supersprint Manifold for OEM Kat Informatie:Supersprint onderdeel: Manifold for OEM Kat Past op: ALFA ROMEO 145 1.8 16V Twin Spark 97 –› Supersprint nummer: 752701 compatible with the OEM catalytic convertersocket for oxygen sensors OEMSupersprint:- Centre exhaust 752703 - Rear exhaust 752909

ALFA ROMEO 145 1.8i 16V (144pk) Twin Spark 99 –› Supersprint Man

ALFA ROMEO 145 1.8i 16V (144pk) Twin Spark 99 –› Supersprint Manifold for OEM Kat Informatie:Supersprint onderdeel: Manifold for OEM Kat Past op: ALFA ROMEO 145 1.8i 16V (144pk) Twin Spark 99 –› Supersprint nummer: 752701 compatible with the OEM catalytic convertersocket for oxygen sensors OEMSupersprint:- Centre exhaust 752703 - Rear exhaust 752909

Alfa Romeo 145 1.8i 16V 1747 cc 104 Kw / 141 cv AR67106 Magnaflo

Alfa Romeo 145 1.8i 16V 1747 cc 104 Kw / 141 cv AR67106 Magnaflow CAT Bouwjaar: 11/96>8/00 Merk: Alfa Romeo Type: 145 1.8i 16V 1747 cc 104 Kw / 141 cv AR67106 Bouwjaar: 11/96>8/00 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80064 OBD not neaded,Euro I and II,Ref. OE:, 60626893, 60626894, 60630078, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.9JTD 1910 cc 77 Kw / 105 cv Magnaflow CAT Bouwj

Alfa Romeo 145 1.9JTD 1910 cc 77 Kw / 105 cv Magnaflow CAT Bouwjaar: 4/99> Merk: Alfa Romeo Type: 145 1.9JTD 1910 cc 77 Kw / 105 cv Bouwjaar: 4/99> Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_81858D OBD not neaded,Euro I and II,Ref. OE:, 46475401, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.9TD 1929 cc 66 Kw / 90 cv AR33601 Magnaflow CAT

Alfa Romeo 145 1.9TD 1929 cc 66 Kw / 90 cv AR33601 Magnaflow CAT Bouwjaar: 8/94> Merk: Alfa Romeo Type: 145 1.9TD 1929 cc 66 Kw / 90 cv AR33601 Bouwjaar: 8/94> Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80061D OBD not neaded,Euro I and II,Ref. OE:, 60812447, 7747286, Levertijd 1 tot 2 weken